RatioTap® | RatioDrill® | RatioMill® becomes
SELECT TAP | SELECT DRILL | SELECT MILL
ONE OPERATION - THREE PROCESSING STEPS
Since 1 December 2020, the companies OSG, BASS, OSG EX-CELL-O and WEXO Präzisionswerkzeuge are organised under the umbrella of the OSG Germany Holding GmbH. Previously, the individual companies were subsidiary or parent companies.
Our RatioDrill is also available as INOX-Typ for drilling stainless steels and other difficult to machine materials.
We have completely revised its tap range for machining abrasive, short-chipping materials up to 45 HRC. These materials include, for example, cast iron materials such as GJL, GJS or GJV, aluminum-silicon cast alloys with a high Si content and high-strength short-chipping steel materials.
We are available for you and supply you reliably!
for a longer tool life and more process reliability with hard-to-machine steels
In the XTOP brochure you will find our entire range from the areas of tapping, drilling and milling.
Come and see the latest Highlights and Innovations in round shank tools on our booth F60 in Hall 4.
In the XTOP brochure you will find our entire range from the areas of tapping, drilling and milling.
XTOP Program extension: Machine taps
Our poduct range has enabled us to unify our customers’ three key purchasing criteria.
HSS-Co deep hole drill! A special developed coating for a small friction coefficient!
XTOP Twist drills with four coolant holes!
The competence for high-alloyed materials!
An optimized geometry which was developed particularly for the machining of corrosion and acid-proof steels, along with a compatible coating, form the basis for WEXO solid carbide end mills of the XTOP series.
INOX | HASTELLOY | TITAN | INCONEL
New machine taps with variable helix!
Forming taps for universal application
Development of new cutting tools for stainless steels!
Threading tools with very attractive Price-Performance-Ratio!
Solid carbide milling tools | Shank end mills | with corner radius | Ball nose end mills | HPC-End mills | High-Feed end mills
Solid carbide drills | NC-Spotting drills
A new geometry, which was developed particularly for the machining of corrosion and acid-proof steels as well as high-alloy steels, along with a compatible coating, form the basis for the new generation of WEXO powder steel taps of the XTOP series!
INOX | HASTELLOY | HEAT-TREATABLE STEEL | TOOL STEEL
Wherever production problems occur when using conventional taps or forming taps, thread milling provides a useful alternative. Machining is effected in one revolution with the rotating tool additionally moving in the axial direction by one pitch turn.
Solid carbide end mill HPC z = 6 / 8
For chamfering and deburring work pieces. Useable in a very wide range of work materials!
Universal, process-sure & fast!
The new SYNCHRO-Program from WEXO!
Valid from October 1st, 2008